NVS Technologies AG

You are here: Main » Products » Antennas » 8117D GPS L1/GLONASS L1 Active Magnetic Mount Antenna
Wednesday, 13 Dec 2017

Русский English

GNSS antennas are a critical but often overlooked part of a receiver setup. Choosing a correct antenna is hugely important since antennas are the main interface between the GNSS space segment and the user, as they capture the L-band signals transmitted by satellites. Antenna must be able to convert the energy in the electromagnetic waves arriving from the satellites into an electric current that is further processed by the receiver. Given that signals received from GNSS satellite are weak and arriving from any direction, it is clear that choosing the correct antenna is imperative. Choosing the optimal GNSS antenna for the application will maximize GNSS receiver’s positioning performance.

NVS Technologies provides a wide range of high quality antennas to suit a wide variety of applications and markets. To access the product specific page, please click on the corresponding receiver below.

8117D GPS L1/GLONASS L1 Active Magnetic Mount Antenna

The 8117D GPS L1/GLONASS antenna is a high performance antenna with a wide voltage range, ideally suited to telematics platforms for use in vehicle-mounted applications. With a wideband patch, this antenna was designed to operate at GPS L1 as well as GLONASS L1 frequencies. Using internal magnets or screw mount holes, the antenna can be installed almost anywhere on a vehicle allowing for greater flexibility. The 8117D antenna features 28 dB gain low noise amplifier and a SAW filter. With 2.7 to 5 volt operation, the antenna can be used with the vast majority of GPS L1 and GLONASS systems available.

Additional Info

  • Description: The 8117D GPS L1/GLONASS antenna is a high performance antenna with a wide voltage range, ideally suited to telematics platforms for use in vehicle-mounted applications. With a wideband patch, this antenna was designed to operate at GPS L1 as well as GLONASS L1 frequencies. Using internal magnets or screw mount holes, the antenna can be installed almost anywhere on a vehicle allowing for greater flexibility. The 8117D antenna features 28 dB gain low noise amplifier and a SAW filter. With 2.7 to 5 volt operation, the antenna can be used with the vast majority of GPS L1 and GLONASS systems available.
    Features
    • GPS L1 & GLONASS L1 Frequencies
    • Voltage range 2.7 – 5 V
    • LNA 28 dB gain typical
    • Low noise figure 1.5dB
  • Specifications: Frequency Range:
    1568MHz - 1618MHz (typical)
    Nominal Gain:
    @ 3.3VDC: 28 dB +/- 1dB (typical)
    @ 5VDC: 30 dB +/- 1dB (typical)
    Noise Figure:
    1.5 dB (typical)
    Voltage: 2.7-5 VDC